Investering gjutning i rostfritt stål

 

Investeringsgjutning av rostfritt stål är en industriell process baserad på gjutning av förlorat vax, en av de äldsta kända metallformningsteknikerna. Termen "gjutning av förlorat vax" kan också hänvisa till moderna investeringsgjutningsprocesser.

Water glass and silica sol investment casting are the two primary stainless steel investment casting methods nowadays. The main differences are the surface roughness and cost of casting. Water glass method dewaxes into the high-temperature water, and the ceramic mold is made of water glass quartz sand. Silica sol method dewaxes into the flash fire, and silica sol zircon sand makes the ceramic mold. Silica sol method costs more but has the better surface than the water glass method.


The process of stainless steel investment casting can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can produce complicated shapes that would be difficult or impossible with other casting methods. It can also produce products with exceptional surface qualities and low tolerances with minimal surface finishing or machining required.

  

Auwell stainless investment casting, the normal material is 304, 304L, 316, 316L and DSS (Duplex Stainless Steel). Recently, we developed 1.4581 stainless steel investment casting parts for a German client for paper industry. Auwell stainless steel investment casting, the size limits are 3 g (0.1 oz) to several hundred kilograms. The cross-sectional limits are 0.6 mm (0.024 in) to 75 mm (3.0 in).


Processen med gjutning av rostfritt stål:

-Skapa ett mästermönster

-Skapa en form

-Producera vaxmönster

- Assemble wax patterns

-Tillämpa investeringsmaterial

-Dewax

- Burnout preheating

-Hälla

-Avyttra

-Efterbehandling

Fördelarna med investeringar i rostfritt stål:

-Utmärkt ytfinish

-Hög dimensionell noggrannhet

- Extremely intricate parts are castable

- No flash or parting lines

 

Auwell Advantages

-Rik upplevelse

More than 20 years of experience in stainless steel investment casting products development and production, especially to the European and North American markets, with solid understanding of the material, technical and quality standards worldwide.

- Fast Turnaround

I allmänhet tillhandahåller vi vattning inom 3 arbetsdagar. Genom att kombinera de senaste tillverkningsteknikerna och anläggningarna kan Auwell tillhandahålla snabba prototyper på bara två veckor för enkla projekt.

- Comprehensive Solution Provider

Auwell provides comprehensive services for stainless steel investment casting projects starting from designing, through prototyping, tooling/fixture development, sampling, mass production, and to logistic and post-sale support.

- Rigid QC Policies

The most rigorous quality policy starts from material control, and is followed through to final pre-shipment inspection. For quality control of casting parts, we provide set of test reports including chemical components, mechanical property, X-ray test, metallographic analysis report etc. For dimension inspection, we offer 3D scanning report, also CMM is available for inspection. We structure our processes, creating Flow Charts and Control Plans before production, making sure all QC processes are in accordance with ISO9001-2015 requirements and drawing specifications.

-Flexibel betalningsperiod

Verktygsbetalningar måste förbetalda. För massproduktion erbjuder vi flexibla betalningsvillkor, rimliga kreditvillkor ges, kunden betalar bara när de är nöjda med den produkt de fick. För långsiktiga projekt erbjuder vi avropstjänster för snabba leveranskrav.


The following catalogues of stainless steel investment casting parts are the ones that Auwell has produced and supplied to our distinguished worldwide clients. Please click the relevant pictures for details. Please be advised, most of the products are for demonstration purposes only.


View as  
 
Som professionella tillverkare av Kina (nyckelord} och {sökord} levererar vi kunderna omfattande projektledningstjänster. Vår fabrik tillhandahåller också tjänster för utveckling av ODM / patenterade produkter, från koncept till design, prototyper, verktyg och massproduktion. Välkommen att köpa anpassat {sökord} tillverkat i Kina från Auwell. Kontakta oss om du vill veta mer.
[email protected]